题 目 |
发表时间 |
刊物名称 |
Nanocatalysts in photocatalytic water splitting for green hydrogen generation: Challenges and opportunities |
2023 |
Journal of Cleaner Production |
Optimizing photothermal conversion efficiency in a parabolic trough direct absorption solar collector through ferrofluid and magnetic field synergy |
2023 |
Energy Conversion and Management |
Effect of drainage device on the transition of dripping and jetting modes |
2023 |
Physics of Fluids |
Multi-objective optimization of elliptical tube fin heat exchangers based on neural networks and genetic algorithm |
2023 |
Energy |
Enhanced film cooling and flow disturbance of an AGTB turbine cascade with plasma aerodynamic actuation at film-holes outlets |
2023 |
International Communications in Heat and Mass Transfer |
Simplified pyrolytic model of RP-3 fuel at high conversion rates and the effects of primary reaction on the regenerative cooling process |
2022 |
Aerospace Science and Technology |
Numerical investigation of pyrolysis and surface coking of hydrocarbon fuel in the regenerative cooling channel |
2022 |
Energy |
Investigation on thermal performance of nanofluids in a microchannel with fan-shaped cavities and oval pin fins |
2022 |
Energy |
Analysis of thermal efficiency of a corrugated double-tube heat exchanger with nanofluids |
2022 |
Energy |
Effects of pin fins and vortex generators on thermal performance in a microchannel with Al2O3 nanofluids |
2022 |
Energy |
Investigation on thermal performance of electric heaters with nanofluids |
2022 |
Fuel |
Effects of swirler blade angle and actuator applied voltage on combustion characteristics and cooling effectiveness |
2022 |
Fuel |
A review of self-cleaning technology to reduce dust and ice accumulation in hotovoltaic power generation using superhydrophobic coating |
2022 |
Renewable Energy |
Investigation on the thermal performance of flat-plate heat pipes with various working fluids under different inclination angles |
2022 |
Energy Reports |
Experimental study on photovoltaic/thermal system performance based on microencapsulated phase change material slurry |
2022 |
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects |
Review on thermal performance of nanofluids with and without magnetic fields in heat exchange devices |
2022 |
Frontiers in Energy Research |
Enhanced film cooling and flow disturbance of an AGTB turbine cascade with plasma aerodynamic actuation at film-holes outlets |
2022 |
International Communications in Heat and Mass Transfer |
Simplified pyrolytic model of RP-3 fuel at high conversion rates and the effects of primary reaction on the regenerative cooling process |
2022 |
Aerospace Science and Technology |
Effects of plasma actuation and hole configuration on film cooling performance |
2022 |
Propulsion and Power Research |
Effects of Elastic Pillars on Fluid Flow and Heat Transfer Enhancement in a Microchannel |
2022 |
Thermal Science |
Effect of dielectric barrier discharge plasma on film cooling performance |
2022 |
Thermal Science |
Experimental study on heat transfer performance and flow visualisation in microchannels with micropillars |
2022 |
Thermal Science |
Improvement of cooling performance of hybrid nanofluids in a heated pipe applying an annular magnetic field |
2022 |
Journal of Thermal Analysis and Calorimetry |
Effects of salt and solidification treatment on the oil-contaminated soil: a case study in the coastal region of Tianjin, China |
2021 |
Journal of Cleaner Production |
Analyses of thermal performance and pressure drop in a plate heat exchanger filled with ferrofluids under a magnetic field |
2021 |
Fuel |
Numerical study of effusion cooling of a gas turbine combustor liner |
2021 |
Fuel |
Enhanced thermal management by introducing nanoparticle composite phase change materials for cooling multiple heat sources systems |
2021 |
Energy |
Effects of hole configuration on film cooling effectiveness and particle deposition on curved surfaces in gas turbines |
2021 |
Applied Thermal Engineering |
Effect of pyrolytic reaction of supercritical aviation kerosene RP-3 on heat and mass transfer in the near-wall region |
2021 |
Applied Thermal Engineering |
Numerical simulation of ammonia/methane/air combustion using reduced chemical kinetics models |
2021 |
International Journal of Hydrogen Energy |
Modelling the biomass updraft gasification process using the combination of a pyrolysis kinetic model and a thermodynamic equilibrium model |
2021 |
Energy Reports |
Investigation of heat transfer characteristics of Al2O3-water nanofluids in an electric heater |
2021 |
Heat Transfer Engineering |
Effect of various surfactants on stability and thermophysical properties of nanofluids |
2021 |
Journal of Thermal Analysis and Calorimetry |
Effects of particle size and mainstream inlet angle on deposition in a turbine cascade |
2021 |
Journal of Energy Resources Technology-Transactions of the ASME |
Numerical investigations of film cooling and particle impact on the blade leading edge |
2021 |
Energies |
Effect of buried depth on thermal performance of a vertical U-tube underground heat exchanger |
2021 |
Open Physics |
Numerical study on heat transfer and flow characteristics of nanofluids in a circular tube with trapezoid ribs |
2021 |
Open Physics |
Multi objective optimization of aspirating smoke detector sampling pipeline |
2021 |
Optimization and Engineering |
Effect and optimization of backward hole parameters on film cooling performance by Taguchi method |
2020 |
Energy Conversion and Management |
Performance analysis of a plate heat exchanger using various nanofluids |
2020 |
International Journal of Heat and Mass Transfer |
Performance of fuel-air combustion in a reheating furnace at different flowrate and inlet conditions |
2020 |
Energy |
Experimental investigation on heat transfer characteristics of various nanofluids in an indoor electric heater |
2020 |
Renewable Energy |
Experimental investigation of heat transfer performance of a heat pipe combined with thermal energy storage materials of CuO-paraffin nanocomposites |
2020 |
Solar Energy |
Heat transfer performance and friction factor of various nanofluids in a double-tube counter flow heat exchanger |
2020 |
Thermal Science |
Numerical study on characteristics of particle deposition efficiency on different walls of 90° square bend |
2020 |
Powder Technology |
Numerical investigation of particle deposition in film-cooled blade leading edge |
2020 |
Numerical Heat Transfer, Part A-Applications |
Investigation of heat transfer characteristics of Al2O3-water nanofluids in an electric heater |
2020 |
Heat Transfer Engineering |
Investigation on thermal-hydraulic performance prediction of a new parallel-flow shell and tube heat exchanger with different surrogate models |
2020 |
Open Physics |
Comparative study of the thermal performance of four different parallel flow shell and tube heat exchangers with different performance indicators |
2020 |
Open Physics |
Experimental investigation on convective heat transfer of ferrofluids inside a pipe under various magnet orientations |
2019 |
International Journal of Heat and Mass Transfer |
Analysis of a hybrid control scheme in the district heating system with distributed variable speed pumps |
2019 |
Sustainable Cities and Society |
Effect of hole configurations on film cooling performance |
2019 |
Numerical Heat Transfer, Part A-Applications |
Effect of phase change materials on heat dissipation of a multiple heat source system |
2019 |
Open Physics |
A novel evaluation method for particle deposition measurement |
2019 |
Open Physics |
Comparison and analysis of two thermal performance evaluation models for a public building |
2019 |
Open Physics |
Effects of gravity and variable thermal properties on nanofluid convective heat transfer using connected and unconnected walls |
2018 |
Energy Conversion and Management |
Medium-term heat load prediction for an existing residential building based on a wireless on-off control system |
2018 |
Energy |
Effect of blockage configuration on film cooling with and without mist injection |
2018 |
Energy |
Analysis of natural convection of Cu and TiO2 nanofluids inside non-conventional enclosures |
2018 |
Journal of Enhanced Heat Transfer |
A review of multiphase flow and deposition effects in film-cooled gas turbines |
2018 |
Thermal Science |
Effect of combined hole configuration on film cooling with and without mist injection |
2018 |
Thermal Science |
Effect of spherical blockage configurations on film cooling |
2018 |
Thermal Science |
Analysis of slab heating characteristics in a reheating furnace |
2017 |
Energy Conversion and Management |
Effect of an upstream bulge configuration on film cooling with and without mist injection |
2017 |
Journal of Environmental Management |
Numerical investigation of mist/air impingement cooling on rough-ribbed blade leading-edge surface |
2017 |
Journal of Environmental Management |
Numerical analysis of ammonia homogenization for selective catalytic reduction application |
2017 |
Journal of Environmental Management |
Two-phase flow simulation of mist film cooling with deposition for various boundary conditions |
2017 |
Numerical Heat Transfer, Part A-Applications |
Effects of surface deposition and droplet injection on film cooling |
2016 |
Energy Conversion and Management |
Effects of deposition locations on film cooling with and without a mist injection |
2016 |
Numerical Heat Transfer, Part A-Applications |
Effects of deposition height and width on film cooling |
2016 |
Numerical Heat Transfer, Part A-Applications |
Investigations of film cooling and its nonuniform distribution for the conjugate heat transfer passage with a compound inclined angle jet |
2016 |
Numerical Heat Transfer, Part A-Applications |
Conjugated heat transfer analysis of a film cooling passage with turbulator ribs |
2016 |
Heat Transfer Research |
